Hard Reset SONY Xperia T3 D5106 - How to Hard Reset hardreset1

 Hard Reset SONY Xperia T3 D5106 - How to Hard Reset,You will notice that we are on this subject, we have added quite a number of ways you can rely on, with care to make things go well, in case there was a problem with the first method or second the way in the third or fourth which can replace it and avoid those obstacles.

Dear it easy for you to begin to follow the following steps are for steps have been numbered so easily accessible to all the readers of the article, all the greetings and appreciation, do not forget to share your opinion in case you experience that way.


First method:

1. If the display is off hold down the Power key to turn it back on.
2. Afterwards go to Settings and then to Backup & Reset.
3. In this step tap Factory data reset and Reset Phone.
4. Next, choose Erase Everything if you are sure you want to clear all your data.
5. Finally, select OK to confirm the whole operation.
6. Well done! The hard reset has just been performed.

Second method:

1. At the very beginning you should download the PC Companion, in example from here: http://www.sonymobile.com/gb/tools/pc-companion/
2. Then, you should install and run it.
3. Next you will see window with 4 options.
4. Choose option "Support Zone New!", and click "Start".
5. Wait for the program to install the appropriate add-on.
6. After that you will see next window with 3 options.
7. Go to option "Phone / Tablet Software Update", and click "Start".
8. Select "repair my phone / tablet".
9. Now follow the instructions and accept all informations.
10. Please be patient and wait until preparing computer for software update is complete.
11. Afterwards choose your phone / tablet model.
12. If you see this window, then connect your device into your PC.

Third method:

1.     Firstly, download flashtool from Sony website: http://developer.sonymobile.com/services/flash-tool/
2.     Make sure, that you have installed drivers for your USB data cable.
3.     Afterwards turn your device off.
4. Then press and hold Volume Down, and connect to USB cable.
5.     Follow the instructions on your screen, and accept appropriate options.
6.     Success!

Fourth method:

1.     Power on your device.
2. Now press Call button, and type: *#*#7378423#*#*
3. Then you will see menu.
4. From this menu choose option Customization Settings -> Reset customization.
5. Confirm information: "data will be cleared and factory data reset will perform".
6. Accept with pressing Reset customization and reboot.
7. Please be patient -> your device will reset and reboots.